Archive for the ‘Step-by-step Projects’ Category

Special Guests at our sister store, Bizzy B’s Stamp & Scrap in Toronto, Ontario

Friday, May 7th, 2010

Two special guests are coming in the next few weeks!!!

This month, Jen Starr is here from May 28-31st with 6 amazing classes!

More information, including class descriptions and images, can be found on Bizzy B’s May calendar here:
http://bizzyb.ca/?page_id=31&mo=5&yr=2010

In June, Sally Lynn MacDonald will be here on June 11-12th with 4 wonderful classes!

Check the June calendar for details, including more information about Sally Lynn, class descriptions, and images:

http://bizzyb.ca/?page_id=31&mo=6&yr=2010

Be sure to reserve your spots quickly so you don’t miss out! Call the store to book your spots at 416-203-0433 or toll free at 1-877-867-8267 if your area is long distance from Toronto.

Also, check out the details below this photo for a special offer!
http://www.facebook.com/photo.php?pid=5279632&id=169988544749#!/photo.php?pid=5279616&id=169988544749&fbid=420528959749

Step-By-Step: Butterfly Card by StephanieScraptivity

Thursday, March 18th, 2010

By Stephanie Zito.

Cut the following papers:
- 6×12” White Bazzil cardstock as base (from past S! kit). Score at 6 to form a 6×6” card.
- Vanilla cardstock –one 5×5” and one 3×3”
- Plain white cardstock 3×3” (Stephanie used Neenah)
- 2 of 1.5×4.5” pieces of Postcard paper.
- 5.25×5.25” piece of Daydream paper.
- 4×4” square piece of Daydream paper.
- Butterfly strip from bottom of Daydream paper.

1. Distress and ink all pieces except 4×4 square (Stephanie used her Heidi Swapp distressing tool (from March/09 S! kit) and Antique Linen Distress ink (available in online store).

March2010_Stephanie_Card_Step1

2. Stamp Inkadooo Butterfly Scroll stamp on white cardstock with Versamark. Heat emboss with copper embossing powder. Apply Shimmerz Blingz and Opal to butterfly and flowers. Adhere Prima e. pearls to centers of flowers (March S! add-on).

March2010_Stephanie_Card_Step2

3. Attach pieces to your 6×6 card base. You can glue pieces down or machine stitch like Stephanie did.

March2010_Stephanie_Card_Step3

4. Cut your 12 bottom butterfly strip from the Daydream paper in half. Fold, making pleats, and snip ends.

March2010_Stephanie_Card_Step4

5. To make paper rose:

Using your 4×4 piece of Daydream paper, draw a spiral as shown using a pencil.

March2010_Stephanie_Card_Step5

6. Cut out spiral with scissors. Starting at the outside of the spiral, put a dab of glue on the end and start rolling (this will be the center of your paper rose). Roll up the entire spiral.

March2010_Stephanie_Card_Step6

7. Your rose should look like this.

March2010_Stephanie_Card_Step7

8. Let your rose loosen up a bit and then firmly squish it with your hand.

March2010_Stephanie_Card_Step8

9. Apply some distress ink to the outer leaves of flower and then apply Shimmerz Blingz to flower.

March2010_Stephanie_Card_Step9

10. Adhere flower and pleated strips to card as shown.

March2010_Stephanie_Card

Close-up:

Butterfly close up

Step-By-Step: Cupcakes by KarenScraptivity

Wednesday, March 17th, 2010

By Karen Thind.

cupcake1

Supplies

1×7” piece of patterened paper

Decorative border punch

Baby washcloth

Glitter sticker

Steps:

Use the border punch along one side of the piece of paper, and then fan fold.

cupcake2

Adhere the two ends together so that it makes the cupcake bottom.

Roll the baby washcloth from corner to corner.

cupcake3

Then wrap it around two fingers. Tuck the tail up through the middle so that becomes the top portion.

cupcake5

Place it into the paper cupcake bottom. Cut out a glitter circle and attach to the top.

cupcake6

Voila! Along with a card it makes a cute part of a Welcome Home Baby gift.

cupcake7

Aunt Darlene Layout: Step-by-Step by CaroleScraptivity

Monday, January 11th, 2010

Created with our January 2010 Kit by Carole Stirrat.

1. Using Prism white cardstock as a base, adhere black and white printed paper from the back side of Teresa Collins “Life Time” paper.

Carole2010Jan_AuntDarleneWeb_Step 1

2. Cut a 6”x12” strip of Teresa Collins “Life Quote” paper, attach black tulle or lace (not found in the January kit) to top and bottom, and adhere the entire piece to the center of your layout.

Carole2010Jan_AuntDarleneWeb_Step 2

3. Cut clocks from Teresa Collins “Life Tags” paper and center of large clock from Teresa Collins “Life Time” paper. Distress edges and ink with brown chalk ink. Trim a straight edge along the right side of large clock center and adhere to right side of layout.

 

 

Carole2010Jan_AuntDarleneWeb_Step 3

4. Adhere a 4×6” photo and quote tag from “Life Tags” paper. Place 7 Gypsies gaffer tape along side of quote tag, and red trim (not included in kit) to bottom of center piece.

Carole2010Jan_AuntDarleneWeb_Step 4

5. Finish layout by adhering clocks, flowers (not in kit), and Basic Grey pearls.

Carole2010Jan_AuntDarleneWeb_Step 5And here you have your completed layout!

Aunt Darlene by Carole Stirrat

Bookmarks With Case: Step-by-Step project by SamanthaScraptivity

Wednesday, December 16th, 2009

Created with our December 2009 Kit by Samantha Taylor.

1. You will need:

- 3 strips of 10 1/2″ x 1 1/2″ card stock (Used here: 1 Bazill Granny Smith, 2 Bazzill Cheddar)

-6 pieces of patterned paper cut 5″ x 1 1/4″ (Used here: 4 Piggy Tales 5 Little Ducks Mother Duck, 2 Piggy Tales 5 Little Ducks Play)

- Empty CD case (optional)

- 6 thin magnets cut about 1/2″ x 1/2″ (I used old freebie magnets, one from “Bob’s Auto Glass, Pizza Places, etc.)

- Assorted buttons, brads, or eyelets.

 

Step 1_SamanthaDec09_web

2. Fold card stock in half and adhere 1 piece of patterned paper to each out side of the card stock.

Step 2_SamanthaDec09_web

3. Attach magnets to the inside, close to the unfolded edge (Note: remember that magnets have polarity, so line up your magnets so they attract, rather than repel).

Step 3_SamanthaDec09_web

4. Embellish the non-magnet end with buttons, brads, or eyelets and ribbon.

Step 4 Brad_SamanthaDec09_web

 

Step 4 Button_SamanthaDec09_web

 

Step 4 Eyelet_SamanthaDec09_web

This is a great fast gift. What’s unique about these book marks is that they are magnetic, so they not only hold your page, but also your place on the page. These can be given out individually or a packaged set of 3 in an empty CD case.

Bookmarks Finished_web

Bookmark in Book_web

Flower Tag ATC: Step-by-Step project by RebeccaScraptivity

Monday, December 14th, 2009

Created with our December 2009 Kit by Rebecca King.

- Trim manila tag to 3.5” tall. An ATC is 2.5×3.5” and this will be just a little bit less wide.

- Heat one side of Penscore with heat gun.

2009DecReb_ATC_step1web

- Quickly press firmly into bubble wrap.

2009DecReb_ATC_step2web

- You’ve created your own bubble wrap stamp!

2009DecReb_ATC_step3web

- Ink stamp with Lagoon Blue chalk ink from kit.

2009DecReb_ATC_step4web

- Stamp onto tag.

2009DecReb_ATC_step5web

- Cut 1.75×2.25” piece of Granny Smith cardstock. Add to tag in middle.

2009DecReb_ATC_step6web

- Hand-cut a flower from Mother Duck paper. Affix Bazzill brad in center.

2009DecReb_ATC_step7web

- Take a 3” strip cut from edge of paper (the part with the writing on it that would be discarded) and fold it around itself to make a .5” thick piece. Adhere it together so it will keep its shape.

2009DecReb_ATC_step8web

- Affix it to back of flower. This will make your flower pop up from the ATC. You could also use a Pop-dot or 3D Glue Dot to achieve this effect.

2009DecReb_ATC_step9web

- And here is your completed ATC!

2009DecReb_ATCweb

Can’t Take My Eyes Off Of You Layout: Step-by-Step project by JanineScraptivity

Saturday, December 12th, 2009

Created with our December 2009 Kit by Janine Rachau.

- Use the back side of One Day as the base – distress & ink the edges, (I used a dark blue ink from my stash but the ink from the kit would work well also)

- Cut a 9” square of Mother Duck

- Center Mother Duck onto the base and adhere (I darkened the edges with a dark ink)

- Cut tags at various points to make a tag border, eye-balling some various sizes that fit well. Create a pattern and leave in place as you proceed to the next steps. I added two Chatterbox Fabulous tags from my stash and cut two fancy edges to a manilla tag from the kit to add a little more visual interests, …but you could easily get the same effect with just the tags included in the kit as they are.

- One by one, crinkle up each tag, and straighten it again putting them back into place so you do not have to start over arranging them.

- Ink the edges and creases of each alternate tag with the blue from our kit, and then the alternate with the green.

- Experiment with the different patterns on your tags with the penscore and the various clearsnap tips to use the “other” color on each tag. For example, if you used blue on the creases, use green to stamp. I included a few images of some of the patterns I created with the penscore for stamping.

Penscore cut for clearsnapCantTakeEyesOffYou_Janine_web

The above photo shows a piece of the Penscore cut to fit on the acrylic piece from the Clearsnap Terrific Tool & Tips.

The following photos show different textures on penscore. 

4aCantTakeEyesOffYou_Janine_web

4bCantTakeEyesOffYou_Janine_web

4cCantTakeEyesOffYou_Janine_web

 

4dCantTakeEyesOffYou_Janine_web

4eCantTakeEyesOffYou_Janine_web

- Double mat a photo using first the opposing side of One Day, and then Granny Apple & place it in the center.

- Use some scrap strips to add some layers below where your photo will lay (I added some Magic Mesh: Dottie Ann self-adhesive mesh – lime from Scraptivity’s August 2007 kit to some kit scraps).

- First adhere the strips, then the matted photo and finally the tags so that they lay on the top a little of your photo and/or strips.

- Add an appropriate title.

4CantTakeEyesOffYou_Janine_web

Nintendo Man Layout: Step-by-step project by AnnieScraptivity

Thursday, December 10th, 2009

Created with our December 2009 Kit by Anne Pennington.

Take one piece of 5 Little Ducks Collection One Day (photo 1).

Use this as your background. The design pattern from this paper inspired the Pac Man/Nintendo theme for this particular layout.

oneNintendoManWeb

Cut a half inch wide strip 7.75” long of 5 Little Ducks Collection Play with stripes running vertically.

Place 4.5×5.5” photo diagonally on page as you wish (photo 2).

Use Memory Essentials Terrific Tool & Tips with square-shaped end to spread Color Box fluid chalk Lime Pastel ink just under photo to add a little more emphasis to lettering. By obscuring the definition of the paper underneath, I hoped to make the lettering pop out from the page a little more for emphasis (photo 2).

twoNintendoManWeb

Cut lettering as you wish to place underneath photo on top of inked area (photos 3 & 4). Anne used the Cricut.

Place striped strip 5 Little Ducks Collection Play underneath photo. (photo 4).

threeNintendoManWeb

fourNintendoManWeb

Ink edges of embellishments. Place embellishments as you wish on remainder of page. Pac Man images were printed from the internet in various sizes and used to emphasize this layout theme (photo 5).

fiveNintendoManWeb

Sweet Layout: Step-by-Step project by StephanieScraptivity

Monday, November 30th, 2009

Created with our November 2009 Kit by Stephanie Zito.

Use 7 Gypsies Catalonia as base for background. Ink edges with Black Soot Distress ink (extra).

Step 1web

Using Hypnotic Core’dinations Black Magic cardstock, trace a design freehand or use template (extra – Stephanie used Technique Tuesday Swanky Frames).

Step 2web

Distress edges using Heidi Swapp Edge Distresser from March /09 S! kit.

Step 3web

Sand cardstock using sandpaper or sanding block.

Step 4web

-Crop photo to 4″ 3/4 x 4″. Using Hypnotic Core’dinations Black Magic cardstock on red side, cut photo mat 5″ x 4″ ½.. Distress and ink edges with Black Soot Distress ink (extra).

-Using Hypnotic Core’dinations Black Magic cardstock, cut out label square using Spellbinders Labels #1 die (extra). Distress edges with Black Soot Distress ink (extra) and sand cardstock.

-Using Hypnotic Core’dinations Black Magic cardstock on red side, print out journalling and cut out with Spellbinders Label #1 die (extra). Ink edges with Black Soot Distress ink (extra).

-Trim 4 pieces of 7 Gypsies Catalonia paper (reverse side) to: 3″ 3/4 x 4″ ½, ½” x 3″ 3/4, ½” x 5″ and ½” x 6″1/4. Ink edges with Black Soot Distress ink (extra).

-Distress and ink edges of 7 Gypsies Ephemera with Black Soot Distress ink (extra).

-Ink edges of Prima stamp packaging with Black Soot Distress ink (extra).

Step _5web

-Machine stitch with red thread around 3″ 3/4 x 4″½ Catalonia piece.

Step _6web

-Using Hypnotic Core’dinations Black Magic cardstock on red side, die cut title (Stephanie used Quickutz Zoe alpha and ran it through her Cuttlebug) and ink with Black Soot Distress ink (extra).

Step _7web

Recycled paper flowers:

 

Using 5 sheets of Scraptivity shipping labels / and or invoices (from your S! boxes) stack sheets together and draw circles (size will depend on size of flower you want). Stephanie used a lid and a flower bottle as a circle template.

Step _8web

Cut your 8 x 11 paper in half and stack together (so you have 10 pieces stacked). Cut out your circles.

Step _9web

Once your circle is cut out, (10 sheets stacked) cut slits around your circle.

Step _10web

Now separate your 10 stacked circles. This step is important so your flower petals do not stick together. Re-stack your circles.

Step _11web

Staple your stacked circles together in the middle.

Step _12web

Now with your stapled circle cupped in your hand, squeeze together and crinkle up the paper. Then fluff to form a flower (you may lose a petal or two here at this step but that’s ok).

Step _13web

Using Glimmer Mist from Oct /09 S! add-ons, spray your flowers, using your fingers to separate the petals for even coverage. Set paper flowers aside to dry.

Step _14web

Assemble your layout as shown, starting with framed, sanded Hypnotic cardstock over 7 Gypsies Catalonia paper. Adhere title to Prima packaging and adhere. Adhere matted photo. Machine stitch around layout with black thread.

Step _15web

Attach 12″ length of Prima lace (Nov/09 S! add-on) to bottom of Catalonia paper.

Attach paper flowers to layout with glue dots. Add a button with floss (extra).

Attach Catalonia (reverse side) paper strips to layout with stapler.

Step _16web

And here’s the final product!

Nov Sweet _StepByStepweb

Tea Holder: Step-By-Step project by SamanthaScraptivity

Monday, November 30th, 2009

Created with our November 2009 Kit by Samantha Taylor.

1. Cut 1 piece of Bazzill Ruby Slipper Vine Cardstock to 4×11 ½”.

Step 1web

2. Score at 3.5, 4, 7.5, and 8 inches.

Step 2web

3. Cut 7 Gypsies Barcelona Manresa paper to 2.75×4. You will need 2 of these.

Step 3web

4. Put the Manresa paper in your scorer the tall way and score at 2 1/2 and 2 1/4. Repeat for second piece of Manresa.

Step 4web

5. Put the Manresa paper in your scorer the long way and score at 1/4, 1/2, 3 1/2, and 4. Repeat for second piece of Manresa.

Step 5web

6. The scoring should make a pattern of 4 squares in both the bottom left and bottom right sides of the paper. Cut these squares out and discard.

 Step 6web

7. With the polka dot side of the Manresa paper facing up, put adhesive on the farthest 1/4 of the paper on the left side, right side, and bottom.

Step 7web

8. Fold the score lined towards the inside (yellow lines), making a sort of box.

Step 8web

9 & 10. Attach 1 box (adhesive is already on the paper from step 7) to the middle section of the Ruby Slipper card stock, and 1 box to the far right section of the Ruby Slipper card stock. These now form your tea bag holders.

Step 9web

 

 

 

Step 10web

11. Cut 2 – 3 x 1/4 strips of 7 Gypsies Barcelona Manresa paper and attach to the top of the tea bag holders.

Step 11web

12. Cut 1 – 3 1/2 strip of Manresa paper and 1 – 3 1/2 x 3/4 strip of Core’dinations Black Magic Awake.

Step 12web

13. Use a Makins texture sheet to emboss the Awake card stock.

 

 

Step 13web

 

14. Sand the Awake card stock to reveal some of the core color.

Step 14web

15. Attach the Awake strip to the Manresa paper (stripe side up). Attach a Brass Photo Hanger to the paper strip with an eyelet.

Step 15web

16. Attach the paper strip to the front of the tea bag box (made from the Bazzill Ruby Slipper card stock).

Step 16web

17. Thread twine, string, ribbon, or thread (not kit items) through the Photo Hanger.

Step 17web

18 Cut 1 piece of 3 1/2 x 3/4 piece of Core’dinations Black Magic Awake. Cut 1 piece of 3 1/2 x 1/4 piece of 7 Gypsies Barcelona Manresa paper. Layer the Manresa paper, stripe side up, on top of the Awake card stock.

Step 18web

19. Attach this strip to the inside flap of the tea bag box.

**All Measurements are in inches

 

Step 19web

Tea holder closedweb

Tea holder partially openweb

Tea holder openweb